Wonderbar

This is a Stanley Tools Wonderbar…I believe the 11″ version. Note, I have no stake in Stanley Tools…yet…(Hey Stanley! Wanna sponsor me?) but must mention this by brand and name. It is an amazing tool!

The Stanley Wonderbar

The Stanley Wonderbar

I’ve been around a while, and have worked on a lot of remodels and repairs. I’ve had occasion to cause mass destruction inside and out of buildings on multiple occasions. I’ve used crowbars, sledgehammers, skillsaws, heck, I’ve even used a chainsaw inside a building. Suffice it to say, I know my destruction.

I picked up one of these Stanley ‘Wonderbars’ in passing at the local home center (I tend to call them “Homeowner Hell”) some years ago. They are not cheap, but it looked handy.

Handy is a complete understatement. Despite it’s small seeming size, this implement of destruction is a joy to work with. It pries, it gets behind tightly nailed boards, it pulls nails…all with startling ease and efficiency. I could single handedly dismantle this entire house with little more than this simple device. Save the crowbars for the giant beams…the Wonderbar is a supremely designed and manufactured tool of massive destruction.

For you gamer/geek types, this is a +20 vorpal bar of separation and destruction. Targets get no savings throw.

I’d have named this thing something like, “Destructor of Worlds” but I suppose it’s a bit harder to market that way.

If you’re pondering any sort of job that requires any amount of destruction (all the good ones do!) forget the crowbar and pick up one of these things.

The Stanley Wonderbar

The Stanley 'Wonderbar'

CUAgain,
Daniel Meyer

Posted in Tools | 2 Comments

Portable Worktable

If you’ve done any sort of work on or about the house…you know you always…and I mean always need a table handy. Tools need to be set down…saws need a spot…plans need to be spread out, and if you passed that magic age of about 35 you know you should set as little stuff on the ground as possible (as you’ll just have to bend over and pick it up again).

My friend Dean gave me this cool folding worktable for Christmas.

Folding Worktable

Folding Worktable

It’s light and easy to carry…and opens quickly. It is extremely strong and stable when opened.

Ready to work...a 10 second change.

Ready to work...a 10 second change.

I’ve already given it a workout…much more of that to come!

CUAgain,
Daniel Meyer

Posted in Tools | Leave a comment

Cordless LED Worklight

My wife got me this for my birthday. Any woman that’ll give ya power tools…well, ya just gotta hang onto her!

Cordless LED Worklight

Cordless LED Worklight

This thing is VERY handy…it’s rechargable, has two intensity levels (bright and VERY bright), a hook to hang it by, a rubber wide base so it will stand up, and finally, a powerful magnet in its butt so it can stick to metal things. Hands down, will replace your general shop hand light.

Er...just calibrating the warp core...

Er...just calibrating the warp core...

I’ve already given it a workout…crawling around under the house to route electrical conduits. It appears that a charge will last several hours.

CUAgain,
Daniel Meyer

Posted in Tools | Leave a comment

House Jacks

There is some minor foundation jacking to be done on this house. Really only one low spot that I can see, and it’s easily accessible (the house is nearly 4′ off the ground and easy to get under) so it should be no big problem, but even minor jacking work can be really expensive to have done. Since I’ve done it, I know what it takes and how to proceed. It’s not complicated, especially now that we have laser levels. Mainly it requires the willingness to crawl under the place in the first place.

Those are screw jacks…sometimes known as “railroad jacks” or “house jacks”. Folks that know what they are, or have used them, know that when they come out, that somewhere, sometime, there is a heap of work to be done.

A variety of House Jacks

A variety of House Jacks

The capacity is based on the screw size. The smallest is 1-1/4″, which is good for about 15 tons. The 2″ are good for 20 tons, and the big ones in the back are 2-1/2″ and good for over 30 tons. The jacks themselves weigh anywhere from 30 pounds for the smallest to 80 pounds or so for each of the two biggest ones. Altogether they weigh something near 400 pounds. Screw jacks are desired over hydraulic jacks for this task. Most hydraulic jacks bleed down or lose height fairly rapidly with large loads. The ones that do not, are expensive.

When it comes to jacks, more is better. Houses are heavy, and if you only have one or two, you can only lift a tiny bit before you have to stop, shim up your work, and relocate the jacks. Placing a large number of them about the area you need to adjust is the easiest and fastest way to get the job done.

Ebay can be your friend in this case. I paid less than $20 for most of these, with that much again for shipping, and that’s a bargain. New they run $250-$350 each for the midsized ones. A couple have problems, but were included with the sale of good ones so were essentially free.

There’s enough jacks there to pick up over 400,000 pounds…nearly half-a-million pounds.

“What the hell are you planning on jacking up?” says an incredulous neighbor.

I just grinned an evil grin and said, “Anything I want to.”

Posted in Tools | Leave a comment

Big Iron

Yes, I am a Texan. I have the requisite “big-ass pick-em-up-truck”. Frankly I’m not sure how anybody gets by without one, but for a project like this you really need one. This is Big Iron, the 450 horsepower, V-10 powered, 3/4 ton, 4×4 Dodge Truck. I grabbed her low mileage/used/cash sale a couple years back after my previous truck got taken out at a red light by a sneaky little blue Chevy thingy.

Ya really gotta watch those sneaky little blue Chevy thingys.

As you will no doubt see in other pictures scattered about the site, she has aged a bit since these were taken (when I bought her)…as all American cars seem to, her paint is now peeling, but she has served me well and should continue to for the duration of this project at least.

While a truck is absolutely essential for a project like this, you may not need the massive 450 horsepower V-10 (8.0 liters!), the four-wheel drive, or the club cab…I’ve just always gone by the principle that if I have to drive a cage (motorcyclist’s slang for a car or truck), it may as well be a fun one!

Advantage Disadvantage
Can haul absolutely anything, anywhere, anytime. Friends and family will call you to haul absolutely anything, anywhere, anytime.
Large used trucks are less expensive then their small counterparts. Gets poor gas mileage
With 450 horsepower, when you stomp on the gas it GOES. State Troopers patrol the highways.

Posted in Tools | Leave a comment

Temporary Heat

The Old Vic came equipped with window units and space heaters, but the space heaters are of the type that must be turned on and off manually, obviously unsuited for unattended operation.

Since we were purchasing the house in the winter (Texas winter, but winter nonetheless), it was critical that we could have it heated enough to keep from freezing the pipes when we are not there. We are also concerned that we keep the house “livable” no matter what we are working on, so that we can be comfortable and have a “home base” while we are there. This was an immediate need, so before we even closed on the house I’d been doing research and purchasing stuff.

It will be some time before we are ready to add central heat and air to the home, so we elected to purchase a couple modern, vent-less space heaters to replace a two of the old units in the larger rooms. The new units have thermostatic control, so they can be set and left unattended. They also have low oxygen cut off, pilot light protection, tip-over protection, and safety features that weren’t even an idea when the old units were made.

Space heaters are still used in a large number of American homes…more homes use space heaters nationwide than have central heat actually…so they have evolved to be safer and more efficient than their older counterparts. A little research on the features I wanted, and then more research to find the best price. Heatershop.com had the best price for included features, so I ordered a couple.

These will keep the house from freezing up when we are not available, and we can supplement them for comfort if needed with the older units on and very cold days that we are there.

The poor UPS guy…it seems like bigger boxes arrive at my house every day.

More Giant Boxes arrive.

More Giant Boxes arrive.

Very well packed, deep inside the giant boxes are the actual heater product boxes.

The brand we chose.

The brand we chose.

Now, a word about space heaters…they have two basic burner types for indoor use; blue-flame or infrared/radiant. Generally, for a large drafty house with high ceilings, you would choose the radiant…they heat objects as well as the air and make things seem warmer. I chose the blue-flame as generally, the radiant are not supposed to be used in smaller rooms, particular bedrooms. We intend to use these in areas of the house where we expect to be sleeping, as we wanted the safety features and unattended operation for those quarters. Both types put out the same heat…the blue-flame simply heats the air more than the objects in the room.

Having used these a bit, and compared to rooms where I installed to old-style units (for attended operation only), now I would probably chose the radiant type. None of the rooms in this house could be really called small.

Anyway, I ordered them on the net, they came fast, as advertised, and in good condition. They work, and work well.

We chose to install the new heaters in the particular rooms we did because, in the current configuration, those are the rooms people are likely to be sleeping in. Also, with a couple doors closed and others intentionally left open, these two heaters can cover the entire plumbed section of the house for freeze protection. They have a nice low setting that works out to about 55 degrees and will ramp up/shut down on their own to maintain it.

One of the new heaters installed in the living room.

One of the new heaters installed in the living room.

The second of the new heaters installed in the dining room.

The second of the new heaters installed in the dining room.

Now, when we are there and working, or have more guests, we will need to heat more of the house to a comfortable level, so we installed the best of the older units around the house. They’ve been thoroughly inspected for proper operation and leaks before installation.

Heater in the round entry room

Heater in the round entry room

Parlor heat

Parlor heat

Sunroom heat

Sunroom heat

The sun-room heater has since been relocated away from the curtains. It is a newer model and does have thermocouple protection as well.

Safe and warm. That’s a good thing! This will provide what we need for as long as we need it.

Heat and air will be an entire different (and future) project.

CUAgain,
Daniel Meyer

Posted in Heat/Air Conditioning | Leave a comment

Just one more day…

In another 23 hours or so…we’ll be closing on The Old Vic…

Butterflies are holding an acid rock concert in my stomach. They brought all their friends!

CUAgain,
Daniel Meyer

Posted in Miscellaneous | Leave a comment

Certainly uncertain.

He didn’t tell me how to live; he lived, and let me watch him do it.
~Clarence Budington Kelland

And I still don’t know.

The right thing?

The smart thing?

I’m never really sure. All my adult life, I’ve waited for that day…that time…perhaps that era, when I would know, really know, that I was doing the right thing.

I think what I’m doing is the right decision. The money makes sense. The timing mostly makes sense. In an imperfect world I don’t expect a better opportunity to happen along…but when can I be sure?

Heh…I never have been. Those of you familiar with my other writings know that I live life confidently and with gusto…or at least I try to…so I should never have a problem being sure of my actions, right?

I’m not. When we bought our first house I was a wreck. Timing, money, situation…they all said it was right, but I never was sure. I plowed ahead like I was. It worked out. Countless situations in my life have been the same way. Not sure, but reasonably aware. Decide and fly! He who hesitates and all that.

But when could I be sure?

For my Dad it always seemed so easy. He knew what he wanted and how to go about it, and confidently moved forward with his life. Oh, it didn’t always go to plan…but he always had one and made the decisions necessary to carry it out. The son learns from the father…and so someday I really expected to KNOW that my decisions were the right ones. When could I plow ahead confidently with my life?

We’re closing on a house Monday. A big one. THE big one. A big step. A dream. But what if something happens? What if my job goes away? The economy is supposedly in a meltdown. What the hell am I doing? If it’s wrong, then when would it be right?

I’m still lucky enough to have my father in my life. We don’t see each other enough, and rarely get to talk alone…father to son…but occasionaly we do.

So I asked him…

“Do you ever really know?”

“Know what?”

“That your decisions…the actions you are pondering…the plan…that it’s right?”

He just laughed…

“No. You just need to make the best decisions you can at the time and act on them like you know what you’re doing.”

Somehow this was a revalation to me. I should have guessed, but never did. Fathers are supreme in their son’s eyes.

“You never really know?”

“Not when you can do anything about it.”

And so another secret passes from the father to the son.

I’ll never really know…I can’t be sure…but that’s not so bad.

It’s worked out okay so far…

CUAgain,
Daniel Meyer

Posted in Miscellaneous | Leave a comment

Ooooo….*puff*puff*puff*gasp*

Just this morning we cleared the last of the hurdles.

I just went to the bank and got a “heap big” cashier’s check. We close next Monday morning at 10:30am.

My gawd…what have I done? LOL!

CUAgain,
Daniel Meyer

Posted in Miscellaneous | Leave a comment

Er…wow?

Got a call today…my NEW bank…NOT “TIC” from the “Bank Job” post, called. It seems we’re ready to go on their part…just the title company stuff now. We should be able to close December 1. I’ll feel even better when I hear from the title company…but that’s really cool. The new bank (I’ll mention them by name after the closing) really pulled through for us. Such a pleasure to do business with! Kudos!

So…I’ve gotta make some utility calls Monday…and hopefully the title company will get with me and tell me how big a check I need to get…

Closer…WooHoo!

CUAgain,
Daniel Meyer

Posted in Miscellaneous | Leave a comment